NETGEAR ProSafe WFS709TP Software Administration Manual page 170

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
3. Navigate to Configuration > Advanced > WLAN > Network > SSID to configure the SSID for
the added APs (Figure
Figure 13-4
4. Click the General tab to configure the SNMP parameters for the set of APs
Figure 13-5
5. Refer to Table 13-3
6. Click Apply to apply the configuration.
13-8
13-4).
and Table 13-4 for the fields to be configured for the set of APs.
v1.0, June 2007
(Figure
Configuring Management Utilities
13-5).