Rebooting Aps - NETGEAR ProSafe WFS709TP Software Administration Manual

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
Figure 10-3
3. Apply the configuration on the master.
Note: To verify that the local WFS709TP has obtained a copy of the global settings,
check the local WFS709TP for the global configuration changes made on the
master, such as authentication changes and WMS settings.

Rebooting APs

The configuration changes take effect only after rebooting the affected APs; this allows them to
reassociate with the local WFS709TP. In the example shown in
rebooted. After rebooting, these APs appear to the new local WFS709TP as local APs
(Figure 10-4).
Figure 10-4
10-4
v1.0, June 2007
Figure 10-3, AP 1.1.20 will be
Adding Local WFS709TPs