Advanced Wlan Configuration In The Browser Interface; Configuring Global Parameters - NETGEAR ProSafe WFS709TP Software Administration Manual
Smart wireless switch
Hide thumbs
Also See for ProSafe WFS709TP:
- Hardware installation manual (36 pages) ,
- Quick start manual (10 pages) ,
- Datasheet (3 pages)
Table of Contents
Advertisement
Figure 5-2
7. Click Apply.
Advanced WLAN Configuration in the Browser Interface
The Advanced WLAN configuration pages allow you to configure the following features:
•
Global SSID and radio parameters that affect all APs in the network
•
SSID and radio parameters for APs in specific locations in the network
The parameters that you configure for global or location-specific SSID and radio configurations
are identical. However, if the same parameters are configured for global and location-specific APs
for a WLAN, the location-specific values override global values.
For example, if you set the maximum number of clients to 30 in the global configuration for
WLAN-01 and set the maximum number of clients to 15 for location 1.2.1 for the same SSID, the
APs in location 1.2.1 will have a maximum of 15 clients.
Configuring Global Parameters
To configure global parameters that affect all APs in the network:
Configuring WLANS
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
v1.0, June 2007
5-9
Advertisement
Table of Contents
