Defining Areas - NETGEAR ProSafe WFS709TP Software Administration Manual

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
2. Type Entrance Level in the Name box of the Floor Editor Dialog.
3. Use the Browse button to locate the background image for the first floor.
4. Click Apply.
To add the background image and name the second floor:
1. Click the Edit Floor link at the right of the Floor 2 indicator.
2. Type Second Level in the Name box of the Floor Editor Dialog.
3. Use the Browse button to locate the background image for the second floor.
4. Click Apply.
5. Click Save on the Planning page.
Figure 4-26

Defining Areas

Before you advance to the AP and AM Planning pages, you want to define special areas where you
do not want to physically deploy an AP or AP, or where you do not care if there is coverage or not.
4-26 RF Plan
v1.0, June 2007