Create A Building - NETGEAR ProSafe WFS709TP Software Administration Manual

Create a Building

In this section you create a building using the information supplied in the planning summary.
1. Click New Building.
The Overview page appears.
2. Click Save.
3. Click Building Dimension.
The Specification page appears.
4. Enter the information shown in
Table 4-3. Building Planning Specifications
Text Box
Building ID
Building Name
Width
Length
Inter Floor Height
Units
Floors
Figure 4-23
5. Click Save.
6. Click Apply.
RF Plan automatically moves to the next page in the list. In this case RF Plan moves to the AP
Modeling Parameters page.
RF Plan
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
Table 4-3
Information
1
My building
100
100
20
Feet
2
v1.0, June 2007
into the text boxes (Figure 4-23).
4-23