Managing Files On The Wfs709Tp - NETGEAR ProSafe WFS709TP Software Administration Manual

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
3. The user can then define a user name and password for the guest account and configure the
expiration for the account. Clicking Apply adds the guest account to the database
(Figure 13-11). The user can then disable, delete, or modify the guest account as needed.
Figure 13-11

Managing Files on the WFS709TP

You can transfer these types of files between the WFS709TP and an external server or host:
• A WFS709TP operating system (OS) image file
• A specified file in the WFS709TP's flash file system, or a compressed archive file that
contains the entire content of the flash file system
Note: You back up the entire content of the flash file system to a compressed archive
file, which you can then copy from the flash system to another destination.
• A configuration file, either active running configuration or startup configuration
• Log files
Table 13-8 lists the external servers that you can use to copy files to or from a WFS709TP.
Table 13-8. Servers for File Transfer
Server Type
Trivial File Transfer Protocol (TFTP)
File Transfer Protocol (FTP)
Secure Copy (SCP)
13-16
Configuration
• IP address of the server
• IP address of the server
• Username and password to log into server
• IP address of the server
• Username and password to log into server
v1.0, June 2007
Configuring Management Utilities