Aircraft Service Configuration - Honeywell JetWave MCS-8562 Installation And Maintenance Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
C.

Aircraft Service Configuration

There are a number of functions that an Ethernet port can support namely, data traffic, data loading,
GUI, AES logs extraction (maintenance function) and status/control (through the SNMP). The
terminal can be configured to indicate whether an Ethernet port supports traffic, data loading,
SNMP etc, such as AG1 SNMP, and data loading, EG1 traffic, using the aircraft service configuration
file.
Once the items have been loaded into the APM the Modman reads the APM once at power-on
and passes the appropriate data to the relevant LRU or uses the information locally.
The following airframe specific information is required for creating the JetWave™ MCS-8562
Terminal configuration files:
- Applicable ARINC 429 Label Definition sets from Aircraft IRS/IRU and GNSS
- Discrete input availability and its polarity
- User Ethernet Ports which are to be configured and the type of services to be enabled (such
as Data Load, SNMP, GUI and OTA access).
- Aircraft blockage data.
- Enable/Disable ability to download software and offload logs.
- External modem installation parameters.
Refer to APPENDIX D for more details.
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
JetWave™ MCS-8562 Terminal
23-15-84
Page 2-3
11 Nov 2020