Installation; Overview; Installation Procedure Overview For The Jetwave Mcs-8562 Terminal - Honeywell JetWave MCS-8562 Installation And Maintenance Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
1.

Overview

A. Installation Procedure Overview for the JetWave
This section includes information about installing the equipment in the core JetWave™ MCS-8562
Terminal. Contact Honeywell about installation kits that include mating connectors and cables.
Honeywell recommends that LRUs be installed in accessible locations that are compatible with
the environmental levels that the equipment is certified to handle.
Refer to APPENDIX C for the installation reference checklist.
Complete the Airframe Specific Information sheet in APPENDIX D. Follow the guidelines in
APPENDIX D to request a new APM configuration. For new configurations, provide this sheet to
Honeywell so an APM file can be generated. Existing APM configuration files are reusable and
can typically be used for subsequent installations on aircraft of the same model. Installers are
encouraged to ensure an APM file is available before beginning an installation. If unsure,
replacement and/or new APM configuration files can be requested from the online form on the
ASDS portion of the Honeywell portal. Note that the typical lead time between APM file request
and APM file is 20 business days, so installers should work this issue early in the installation
process.
NOTE:
NOTE:
The JetWave™ MCS-8562 Terminal installation procedure includes:
- the Modman, APM, Maintenance Panel and Discrete wiring
- the KANDU
- the AIM or the LAIM
- the BUC-HPA Thermal Pad and the BUC-HPA
- the FMA
- Cabling and drawings.
- Optional installation of external modem and IF switch.
Refer to Table 3-5 for a detailed explanation of the discrete signals required for correct operation
of the system.
The overview of the installation procedure for the JetWave™ MCS-8562 Terminal is as follows:
(1) Install adapter plate for the FMA. For Fuselage Mount Configurations, install either the
ARINC 791 style antenna interface mount (AIM) or non ARINC 791 local antenna interface
mount (LAIM), depending on the selected installation option. Installation shall be per
instructions related to each configuration. The adapter plates required for mounting the
OAE are available in installation kits from Honeywell and various other suppliers.
(2) Install the OAE and JetWave™ MCS-8562 Terminal components in accordance with the
installation drawings provided.
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
JetWave™ MCS-8562 Terminal
SECTION 3 – INSTALLATION
ARINC 429 labels may be obtained from the aircraft ADIRU or MMR or other suitable
equipment, providing they meet the required update rate, latency and accuracy.
For FMA located in Non-ARINC791 defined positions, a structural blockage map will
have to be defined for the aircraft.
MCS-8562 Terminal
23-15-84
Page 3-1
11 Nov 2020