Jetwave Mcs-8562 Terminal Internal Lru Installation; Modman - Honeywell JetWave MCS-8562 Installation And Maintenance Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
(3) Install wiring in accordance with the interconnection diagram. The cables and adapters
are available as installation kits from various suppliers.
(4) Do wiring and RF cable checks to make sure they are installed correctly and meet the
installation requirements.
(5) Apply power to the system.
(6) Install radome after completion of post installation checks.
2. JetWave MCS-8562 Terminal Internal LRU Installation
A.

Modman

Install the Modman in a standard 4-MCU tray. The customer is responsible for providing the
mounting tray, the mating ARINC 600 connector, contacts, all the cabling for the installaton as well
as any installation measures necessary to prevent the Modman from being exposed to dripping
water.
Refer to Figure 3-6 or Figure 3-7 for outline and installation information, and Figure 3-12 for the
applicable interconnect diagram.
There are no special tools, fixtures, and equipment required for the Modman installation.
Minimum clearance for the Modman: 1.0 inch (25.4 mm) clearance from top face, 0.5 inch (12.7
mm) clearance from all the other faces not interfacing with the mounting tray.
(1) The Modman mounting kits are as follows:
The customer is responsible for providing the mounting tray. Carlisle Interconnect
Technologies supplies 4-MCU ARINC 600 kits in various configurations, contact Carlisle
at www.carlisleit.com.
(2) The Modman connectors are as follows:
Mating Connector
ARINC 600 Connector
Connector PN
PN 620 601 191
Insert A:
PN 620176008
Insert B:
PN: 620361
PN 620176008
Insert C:
PN: 620240
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
JetWave™ MCS-8562 Terminal
Table 3-1. Mating Connector
Radiall P/N
NSXN2B875S00
Table 3-2. Modman ARINC 600 Connector
Description
ARINC 600 connector shell Size 2 with inserts
Arrangement Q11, Shell Size 2:
Size 8 quadrax contact for Ethernet connections
Arrangement 120Q2, Shell Size 2:
Size 22 Socket Contacts
Size 8 quadrax contact for Ethernet connections
Arrangement 12F5C2, Shell Size 2:
#12 pin contacts
23-15-84
Qty
1
11
118
2
4
Page 3-2
11 Nov 2020