Honeywell JetWave MCS-8562 Installation And Maintenance Manual page 61

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
Discrete I/O
TX Control
Public Services Disable
Ground Transmit Enable
Modman Reset
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
JetWave™ MCS-8562 Terminal
Table 3-5. Discretes Table (Cont)
Pin
KANDU J1-D
Modman J1-MP11E
Modman J1-MP11D
Modman J1-MP10C
Description
The discrete shall disable
the transmission of signals
when grounded, and allow
transmission when open.
Signal type: Input
The discrete shall disable
the PODD interfaces when
grounded, and enable
PODD interfaces when
open.
Signal type: Input
The discrete shall request
the AES when in normal
operation mode to ignore
Air/Ground status and
provide user service.
- Ground = Enable RF
transmission on the
ground.
- Open = Normal.
Signal type: Input
This discrete can be used
to reset the Modman (and,
in turn the entire AES)
- Ground = Mod-
man/AES reset
- Open = Mod-
man/AES normal
operation
- Signal type: Input
23-15-84
Mandatory / Optional
Mandatory
Optional
Mandatory
Optional
Page 3-9
11 Nov 2020