Buc-Hpa; General; Buc-Hpa Thermal Pad Kit - Honeywell JetWave MCS-8562 Installation And Maintenance Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
KANDU bonding to the aircraft must be achieved through the mounting structure (fasteners) and
KANDU A3J1-A.
The KANDU bonding resistance measured from the measuring point and the surface the unit is
mounted must be less than 2.5 mΩ.
4.

BUC-HPA

A.

General

(1) There are no special tools, fixtures, or equipment required for the installation of the
BUC-HPA.
(2) Refer to Figure 3-10 for outline and installation information. Refer Figure 3-12 for the
applicable interconnect diagrams.
B.

BUC-HPA Thermal Pad Kit

(1) The thermal pad kit, PN SCD-90402388, is intended to provide a conduction interface
between the bottom surface of the BUC-HPA conduction-cooled PN 90003227-003 and
airplane cold plate or mounting panel. Before mounting units on the airplane, the thermal
pad must be installed on the units.
(2) Kit Contents
(a)
PN
MPW0000118
MPW0000122
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
JetWave™ MCS-8562 Terminal
The thermal pad kit, PN SCD-90402388, contains the parts identified in Table 3-6.
Table 3-6. Thermal Pad Kit
Description
Thermal pad, conduction, 60 Mil T-Flex Ka airborne, Part 1
Thermal pad, conduction, 60 Mil T-Flex Ka airborne, Part 2
23-15-84
Quantity
1
1
Page 3-13
11 Nov 2020