Honeywell JetWave MCS-8562 Installation And Maintenance Manual page 42

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
Characteristic
Height
Weight
Operating voltage
Power consumption
Power dissipation
Cooling
Operating temperature
Maintenance
Interfaces
Characteristic
Part Number
Length
Width
Height
Weight
Operating voltage
Operating temperature
Power dissipation
Cooling
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
JetWave™ MCS-8562 Terminal
Table 1-5. BUC-HPA Leading Particulars (Cont)
Specification
2.08 inches (52.8 mm) maximum
11.5 pounds (5.2 kg) maximum (including thermal pad)
BUC-HPA 10.75 pounds (4.9 kg) nominal
Thermal pad 0.75 pounds (0.34 kg) nominal
115 VAC, 400 Hz
220 watts maximum at MOP 96-122 VAC
200 watts maximum at MOP 96-122 VAC
Conductive - cooled through the baseplate with thermal pad.
BUC-HPA will mute the transmit RF signal if the hottest point on the
aircraft baseplate exceeds 185°F (85°C).
BUC-HPA will automatically un-mute once BUC-HPA cools below
167˚F (75˚C).
-67°F (-55°C) to 185°F (85°C)
No scheduled maintenance required
J1 - Aircraft power input
J2 - Control interface from KANDU
J3 - RF TX to OAE
J4 - IF RX from OAE
J5 - IF TX from Modman
J6 - IF RX to Modman
Table 1-6. FMA Leading Particulars
Specification
90002609-001
23.03 inches (585 mm) maximum
35.72 inches (907.3 mm), maximum reflector sweep volume
9.39 inches (238.51 mm) maximum
88 pounds (39.92 kg) maximum
NOTE: The lifting fixture is 5.5 pounds (2.5 kg)
38 VDC and 24 VDC for IMU supplied by the KANDU
-67°F (-55°C) to 158°F (70°C)
160 W @ steady state
Natural convection and radiation only
23-15-84
Page 1-4
11 Nov 2020