SCREEN
How to View the Panel Configuration
The Panel Config button displays a screen that contains the
configuration of the panel that the TouchCenter is connected to. To
view the panel configuration, do the following:
SCREEN
SECTION 4: Initial Setup
ACTION
2. Enter the 4-digit User Code
corresponding to the user that you want to
obtain Authority Level information about.
An Authority Level screen containing this
information will be displayed.
3. Press the BACK button to return to the
"Central Station Screen".
Note: The User Levels listed on this
screen match the User Levels in
commercial panels. See the chart below
for corresponding User Levels in
Residential Panels.
Authority In Panel Level Shown As
Standard User
Operator A
Arm Only
Unknown
Guest
Operator B
Duress
Duress
Partition Master
Master
System Master
Master
ACTION
1. On the "Central Station" screen press
the Panel Config button. A Panel
Configuration screen will be displayed
providing details of your system.
4–11