Configuring Controlnet Interface Card - Honeywell HP ProLiant DL360P Gen8 Service Manual

Chapter 4 - Operation
ATTENTION
TC-PCIC02: Controlnet Network interface can be connected to HP Proliant DL360p Generation
8 (Gen8) server using Magma PCIe to PCI converter. For more information on "How to connect
using Magma Converter?", refer to the Magma PE3R Installation Instructions available at the
following Honeywell Process Solutions support website.
https://www.honeywellprocess.com/library/support/Documents/Experion/Magma_Installation_
Instructions_HWDOC-X279-en.pdf
4.3

Configuring ControlNet interface card

You can configure a ControlNet interface card using the Magma PE3R PCie to PCI converter box.
1. For more information on the Magma PE3R PCie to PCI converter box, log into
honeywellprocess.com.
2. Enter your user name and password.
3. Go to the Product Support section.
4. Search for Magma PE3R instructions.
- 39 -