Installing The Cisco As5350Xm Universal Gateway; Setting Up The Chassis - Cisco AS5350XM Installation Manual

Installing the Cisco AS5350XM Universal
Gateway
This chapter guides you through the installation of the Cisco AS5350XM universal gateway and includes
the following sections:
•
•
•
•
•
•
•
Warning Only trained and qualified personnel should be allowed to install or replace this equipment.
Statement 49
This equipment is intended to be grounded. Ensure that the host is connected to earth ground during
Warning
normal use. Statement 39
Warning Incorrect connection of this or connected equipment to a general purpose outlet could result in a
hazardous situation. Statement 87

Setting Up the Chassis

You can set the chassis on a desktop or install it in a rack. Use the procedure in this section that best
meets the needs of your network:
•
•
OL-6417-02
Setting Up the Chassis, page 3-1
Connecting to the Network, page 3-6
Connecting to the Console and Auxiliary Ports, page 3-11
Connecting a Signal Generator to the BITS Port, page 3-12
Connecting an Alarm to the Alarm Port, page 3-13
Supplying Power, page 3-13
Where to Go Next, page 3-18
Setting the Chassis on a Desktop
Rack-Mounting the Chassis
C H A P T E R
Cisco AS5350XM Universal Gateway Chassis Installation Guide
3
3-1