Cisco AS5350XM Installation Manual page 36

Setting Up the Chassis
Required Tools and Equipment
You need the following tools and equipment to rack-mount the chassis:
•
•
•
•
•
Figure 3-2
Bracket for 19-inch rack
Attaching the Brackets
To attach the mounting brackets to the chassis, follow this procedure:
Set the chassis on a flat surface. (See
Step 1
Note
Attach the standard 19- (48.26-) or 23-inch (58.42-cm) rack brackets to the sides of the chassis. Use the
Step 2
screws provided with the mounting brackets. (See
Note
Figure 3-3
Note: The second bracket attaches to the other side of the chassis.
Cisco AS5350XM Universal Gateway Chassis Installation Guide
3-4
Number 2 Phillips screwdriver (not included)
Medium flat-blade screwdriver (not included)
Screws for attaching the chassis to the rack (not included)
Standard rack-mount brackets (included)
Screws for attaching the brackets to the chassis (included)
Standard Rack-Mount Brackets
Bracket for 23-inch rack
The chassis may be installed with either the front or rear panel facing forward.
There are three sets of mounting holes on the sides of the chassis. Attach the brackets for front,
rear, or middle mounting.
Standard Bracket Installation—Front Panel Forward
The chassis can also be installed with the rear panel forward.
Chapter 3 Installing the Cisco AS5350XM Universal Gateway
Figure 3-3.)
Figure 3-3.)
OL-6417-02