Cisco AS5350XM Installation Manual page 80

Installing the Power Supply
Figure B-11
Connect the two power connectors to the system board and backplane. (See
Step 2
system board connector first, followed by the backplane connector. (See
Note
Figure B-12
Front panel
Replace the air separator, holding all cables to the right of the separator as you slip it into the chassis.
Step 3
(See Figure
Cisco AS5350XM Universal Gateway Chassis Installation Guide
B-10
Inserting the Power Supply in the Chassis
Power
supply
3
Front panel
The system board connector is located on the system board, below and to the left of the
backplane connector.
Reconnecting the Power Cables to the Backplane
Power
supply
3
Power connector
Backplane
B-13.)
Appendix B Replacing the Power Supply
Chassis bottom
Figure
Figure B-12.)
Chassis bottom
B-8.) Connect the
OL-6417-02