Table of Contents
Advertisement
3G Router
5.3.6. UMTS Routing table
The calls received on the UMTS interface can be rejected or forwarded on the FXS or FXO interface.
Default is "route to FXO".
Press Add to insert a new rule.
Incoming
Calling number will be analyzed to apply the rule.
Route to
It defines the calls management: to reject of to forward to FXS or FXO.
Dial
Insert the number to be dialed on FXO or FXS interfaces. If the parameter is blank the caller will hear the Dial Tone.
5.3.7. FXO Routing table
In order to enable this menu, the parameter FXO calls route to in Voice configuration menu must be set to GSM – FXO
gateway.
With FXO routing table you can decide to permit (call enable yes) or deny (call enable no) the call according to the prefix number
dialed. The call will be dialed through GSM/UMTS module.
5.24
Configuration
Advertisement
Table of Contents
