Voice Configuration; Mobile Extension - Mex Application - Digicom 3G Corporate DG 11 User Manual

3G Router

5.3. VOICE CONFIGURATION

In this chapter we refer to two different phone interfaces: FXS and FXO.
FXS interface corresponds to Tel connectors of 3G Router and it can be connected to a phone or to an analog interface of a
PABX (trunk side).
FXO interface corresponds to LINE connector of 3G Router and it can be connected to a PABX extension or to a public analog
line.
The configurations for FXO interface are available only for 3G Router models that support this interface.
5.3.1. Voice Configuration
In this page you can configure the general parameters for voice interface.
NOTE: Integra is a special application implemented for Movistar / Telefonica Spain operator.
5.3.1.1. Mobile Extension – Mex Application
To manage this application, select Mobile EXtension in the Menu.
The Mobile EXtension application is performed by 3G Router models supporting both FXO and FXS interface. The installation
is performed through the connection of FXO interface on the extensions side of the PABX and of a phone on the FXS interface
of 3G Router.
Attention: For Mobile Extension configure FXO calls route to: FXS – DialThoru gateway
5.18
Configuration