3G Router
cut down. It is possible to set an high disconnection time and remotely interrupt the connection via WEB
(disconnect button) or via SMS (code disconnect)
Wait IP timeout (s):
this parameter reduces the connection time in critical situations (the operator does not assign the IP
address and a new attempt is performed). Do not insert values lower than 20s.
CLI activation:
Possibility to remote enable the connection through the Caller ID. Available only if the SIM supports voice
calls.
Phone Num.1-2:
Insert 2 phone numbers authorized to remote enable the call (CLI). The numbers must be inserted with
the international prefix (i.e. +393351234567)
SMS Answer:
If enabled, 3G Router will send a reply SMS after the connection. If disabled, it will activate the connection
without sending SMS. The reply SMS is composed by the IP address, get from the network, followed by
the text that can be inserted by the side of the check box "sms answer".
Select Save & Reboot, press Commit and then Reboot (Last) to save and make the configuration active.
Configuration
5.15