Table of Contents
Advertisement
3G Router
• SMS reception (Configuration\ WAN\ 3G UMTS\ Remote Activation)
• Reception of a phone ring (Configuration\ WAN\ 3G UMTS\ Remote Activation)
• At e-mail reception from devices on the LAN interface (Configuration\Security\E-Mail)
• At digital input status change on model 3G Corporate (Configuration\Security\ In Out)
The connections time is defined in the "Disconnect timeout (s)" parameter in the Remote Activation menu.
If during the data connection you need to modify the Disconnect timeout (s) or to disable it (for example if in an alarm situation you
are controlling a remote IP Camera) you will be able to intervein using the options in the menu.
Timer Status
It displays the time to disconnection.
Set Value
It defines the time to be set as "Disconnect timeout" for the current connection. After the value has been
inserted (seconds), press "Set" to enable it.
Disable
It disables the "Disconnect timeout" for the current connection.
ATTENTION: to sttop the connection press "Disconnect" in the Home configuration page.
NOTE: The actions that you can enable in the "Configuration\Security\Disconnect timeout" configuration
menu will be valid only for the current connection and will not modify the "Disconnect timeout (s)" value
set in the Remote Activation menu.
• Reboot Time-out
It defines the schedule for the automatic reboot. After setting the value,remember to save the configuration. We suggest not to
insert a value lower than 12 hours.
Configuration
5.41
Advertisement
Table of Contents
