Digicom 3G Corporate DG 11 User Manual page 36

3G Router
The Remote Activation functionality can:
1. Enable a remote connection via SMS. The text to be sent to 3G Router is "code connect".
2. Enable a remote connection with the CLI identification (Caller ID).
3. Remote reset 3G Router via SMS (power off - power on). The text to be sent to 3G Router is "code reset".
4. Interrupt a connection (Connection option: Manually) via SMS. The text to be sent to 3G Router is "code disconnect".
NOTES:
SMS Syntax
The SMS to be sent to 3G Router must be composed by: code, blank, text (connect, reset or disconnect)
written in small letters.
More activation simultaneously
If while a Remote Activation connection is active, a new connection message comes, 3G Router immediately
answers to the new request informing about the IP address in use and restarting the "Disconnect
timeout".
Reply SMS "NO IP address"
It shows 3G Router hasn't got an IP address from the operator. Send connection SMS again. This can occur
for temporary problems of connection or for credit exhausetd.
5.16
Configuration