Table of Contents
Advertisement
3G Router
To configure the WAN IP settings:
• Select/Unselect to enable or disable the Access Configurator option. In case you enable the access configurator, enter the
value in Access Concentrator.
• Select one of the following options:
• Obtain an IP address automatically.
• Use the following IP address: specify the WAN IP Address.
• Click to Enable NAT.
• Click to Add Default Route.
• Click Next.
To configure the broadband user name and password:
• Enter the user name in Broadband User Name.
• Enter the password in the Password field and confirm it by entering it again in the Confirm Password field.
• Specify the network session by selecting Always On, Dial on Demand or Manually Connect option. You can also choose to
disconnect after a specified period when no user activity is detected. Also, you can specify "Consider Lanside Traffic Only". By
default, the option Always On is selected.
• Click Next.
5.12
Configuration
Advertisement
Table of Contents
