3G Router
5.6. FIREWALL
5.6.1. IP Filtering
To specify the IP filter settings:
Enable/disable the IP filter by selecting Enabled/Disabled. Click Apply.
Port Filters
Edit or delete the port filters by clicking Edit or Delete.
IP Filters
To add an IP filter:
• Click Add.
Add New Outbound IP Filtering page opens:
• Enter the name of filter rule in Filter Rule Name.
• Select the filter policy from the Select Policy drop down list.
• Select one of the option for the direction of filter packets: Outbound traffic, Inbound traffic, Both
• Specify the Port Filter Rule by specifying the Protocol, Source IP Range, Source Port Range, and Status (Enabled/
Disabled).
Configuration
5.35