Supplementary Services - Digicom 3G Corporate DG 11 User Manual

3G Router

5.3.8. Supplementary services

The supplementary services must be supported by the mobile/SIM operator you use in order to be managed.
Call waiting
The Call Waiting service allows to be informed of an incoming call when you are already in a conversation.
To answer the incoming call, put on Hold the current conversation by pressing R2 (flash+2). Pressing R2 again you can switch
from a conversation to another.
To close the current call and take the one on hold, press R1 (flash+1).
Multiparty service
It enables a simultaneous conversation with 2 people. To enable the Multiple Conversation press R3 (flash+3) on the phone
connected to 3G Router.
Here below the services managed by 3G Router (depending on the mobile/SIM operator you use). No WEB configuration menu
must be enabled.
HOLD
During a conversation the user can put the call on hold by pressing R (flash) on the phone connected to 3G Router. Pressing R
again the on hold call will be restored.
ACO, Additional Call Offering
After the conversation (R) has been put on hold, the user will hear the dial tone and will be able to make a second call. With R1,
R2 and R3 you will be able to manage to simultaneous calls (see Call waiting and Multiparty service).
3G Router manages the supplementary services in two ways, from web page or from DTMF (it will be sufficient to digit some codes
from the phone connected to the FXS interface).
In the web page there are some push buttons to Enable, Disable and Verify the state of the service.
Before using the Call Barring you must insert the password used by your mobile operator to manage these services.
5.26
Configuration