Table of Contents
Advertisement
3G Router
2.1. BATTERY BACKUP
The battery backup is placed into the product. The connection of the battery is at the installer or at the end user's care.
Battery backup features: Li-ion 7,4V 1700mAh
To install and connect the battery backup:
• Power off the device and remove the plastic cover by turning the screws
• Connect the battery and insert the connector into the card as shown in picture
• Close the upper plastic cover and secure it by using the three screws.
2.1.1. Replacement of battery
The battery is sticked on the device.
To replace it, disconnect the connector from the card and gently remove the battery.
Note: You are advised to use battery supplied by Digicom only.
Hardware Installation
2.3
Advertisement
Table of Contents
