Table of Contents
Advertisement
3G Router
Security Settings
You can disable or enable with WPA or WEP for protecting the wireless network.
Select Security Option: Select the security option from the drop down list.
The available security options are: Off – No Encryption, 64 Bit Encryption, 128 Bit Encryption, Wi-Fi
Protected Access, Wi-Fi Protected Access 2, and WPA Mixed Mode. Click Confirm
WEP Encryption:
To prevent unauthorized wireless stations from accessing data transmitted over the network, the router
offers highly secure data encryption, known as WEP. If you require high security for transmissions, there
are two alternatives to select from: WEP 64 (64 Bit Encrtyption) and WEP 128 (128 Bit Encrtyption) .
WEP 128 will offer increased security over WEP 64.
Select Key Method:
With Pass Phrase you will insert a WEP Pass Phrase and with Direct Key you will insert a Key.
WEP Pass Phrase:
This is used to generate WEP keys automatically based on the input string and a pre-defined algorithm
in WEP64 or WEP128.
Key:
Enter the key to encrypt wireless data. To allow encrypted data transmission, the WEP Encryption Key
values on all wireless stations must be the same as the router.There are four keys for your selection.The
input format is in HEX style, 10 and 26 HEX codes are required for WEP64 and WEP128 respectively.
WPA (Wi-Fi Protected Access): There are two types of the WPA-PSK and WPA2-PSK.
WPA Pass Phrase:
The key for network authentication. The input format is in character style and key size should be in the
range between 8 and 63 characters.
Configuration
5.3
Advertisement
Table of Contents
