Table of Contents
Advertisement
3G Router
The Mobile Extension (MEx) application allows the diversion of a PABX extension to a mobile phone with the maximum portability.
It turns your mobile phone into a PABX extension with the advantage to keep the communication with the PABX, if compared with
the traditional call forwarding. For example this permits to forward a call, received on the mobile phone, to an extension during
the conversation itself.
To enable the call diversion both to the phone connected to the FXS interface and to the mobile phone (Mex Number), enable
the Activate option.
The activation will be identified with a special dial tone.
You can enable/disable the Mobile Extension functionality on the phone connected to the FXS interface. The "Code for DTMF
Activation" can be set via web interface (default "**").
Calls to PABX extension connected to the Gateway (Activate option not enabled)
All the calls addressed to the PABX extension connected to the Gateway (fxo) will be diverted to the phone connected to the FXS
interface (Phone 1).
Calls to PABX extension connected to the Gateway (Activate option enabled)
Both the phone connected to the FXS interface (FXS Phone) and the number of mobile phone associated to this functionality (Mex
Nember) will ring simultaneously when an incoming call arrives to the PABX extension where the FXO interface is connected.
If the communication with MEx Number is enabled, it will be possible to restore the communication with the PABX.
• From MEx Number you will be able to forward the call to a PABX extension.
• Digit "#" on the mobile phone; 3G Router will reproduce the flash to the PABX; on the MEx Number it will hear the dial tone and
it will possible to dial a PABX extension (i.e. 101). In the meantime the person of the first call is on hold.
• When 101 extension answers, you will be able to put it in communication with the first person (who is on hold) simply hanging
up or pressing "#" again, the on hold call will be enabled.
Note: The "#" character, used as flash button on the mobile phone (MEx Number) can be modified in the
(Line – FXO) GSM code for Flash.
Calls to the mobile phone number of the SIM in 3G Router
The calls will be managed according to the setting of UMTS Routing Table menu.
Outogoing calls from (Phone 1)
The calls will be managed according to the setting of FXS Routing Table menu.
MEx Number
GSM/GPRS
FXO
PSTN
ISDN
FXS
Phone 1
Configuration
5.19
Advertisement
Table of Contents
