Casio DT-X200 Service Manual page 68

(4) Removing the I-CASE, VIBRATION-MOTOR, LAN-ANT-UNIT
1. Remove the VIBRATION-MOTOR.
2. Remove the LAN-ANT-UNIT.
Note: LAN-ANT-UNIT is fi xed with a double-face tape.
Notes on reassembling:
• When the I-CASE is to be replaced, the following parts should be mounted on the I-CASE as
they are not included in.
Spacer
Be sure that it does not go higher than the rib.
W-TAPE/2D-SPACER
SPACER/2D
VIBRATION-MOTOR
Spacer
2D only
– 65 –
DT-X200/DT-X8
I-CASE
LAN-ANT-UNIT
Spacer
Double-face Tape