Casio DT-X200 Service Manual page 29

5-4-4. Initial Settings
1. Registration and confi rmation of Product ID
No.
Start up
\\My Device\FlashDisk\DIAG.
1
Enter the barcode serial number
(individual ID) written on the
back side of DT-X200/DT-X8.
Note:
Enter only the rightmost 14
digits of the written number.
2
(to be continued)
Press the
"
[ENT] OK
"
Tap OK
3
Start up
under \\My Device\FlashDisk\
4
DIAG to see that the product ID
is correctly registered.
Operation
" "
IDSET_PY-052 under
14 digits
"Enter"
key or tap
"
.
"
.
" "
IDCHK_PY-052
Display
– 26 –
DT-X200/DT-X8
Test Details
Check that an individual ID write
tool has been started up.
"
Check that the message Model/ID
"
Setting Successed is shown.
DT-X200/DT-X8 restarts
automatically.