Casio DT-X200 Service Manual page 13

Item
NFC Communication Protocol
Standards
ISO14443 Type A
ISO14443 Type B
Felica (JIS X 6319)
ISO15693
ISO18092
Communication
between terminals
ISO18092
Card mode
USB Host
Client
microSD
Extension Port
Speaker
Microphone
<
Power Supply/Data Communication Terminals
Pin No. Name
1 V CRADLE
2 D+
3 D–
4 USB_ID
5 V BUS
6 GND
Supported
 MIFARE Standard/MIFARE Ultralight
JICSAP
 * Before introducing, prior confi rmation of card is required as
some cards may be out of ISO standard.
 Felica Standard
I•CODE SLI, I•CODE SLI-S, I•CODE SLI-L, my-d VID plain,
my-d Light, Tag-it plus, Tag-it pro, Tag-it standard

* It will take time to write data to Tag-it. Also, there are some
commands that require retry on application.
 * Not supported by software

Transmission rate:
External output power: 5V ± 0.25V/100 mA
Transmission rate:
USB power feeding:
SDHC supported
Monaural
Monaural
>
1 2 3 4 5 6
I/O box power
USB D+
USB D–
USB host/client switching
USB power
GND
Specifi cations
Operation-check confi rmed IC
Full speed (12 Mbps), Low speed (1.5 Mbps)
Full speed (12 Mbps)
5.0V ± 0.25V/500mA or more
Function
— 10 —
DT-X200/DT-X8
Input/Output
-
IN / OUT
IN / OUT
IN
-
-