Casio DT-X200 Service Manual page 44

5-4-6. Communication test
1. Cradle I/F (USB-Host)
No.
Set DT-X200/DT-X8 to
Cradle" and connect a USB
memory.
Set the changeover switch of
the cradle to
1
Select "
Host)" from All Test MENU-4
screen.
2. Cradle I/F (USB-Client)
1. Preparation
Ethernet Cradle
(HA-K62IO)
*1: Depends on the OS to be used. (ActiveSync: for Windows XP or earlier, Windows Mobile Device
Center: for Windows Vista or later)
2. Operation
Check that the communication between the PC and DT-X200/DT-X8 is properly established
using Microsoft ActiveSync/Windows Mobile Device Center.
For details, refer to "Quick Start Guide".
Note: Be sure to turn the selector switch of the cradle to "B".
Operation
"
Ethernet
"
A".
[1].Cradle I/F (USB
AC Adaptor for Ethernet Cradle
( AD-S42120B-N)
Power Cord for Europe:
Power Cord for America: AC-CORD-US
Power Cord for Taiwan:
Power Cord for Korea:
Power Cord for Australia: AC-CORD-AU
Display
USB Cable
PC: None specified.
(Pre-installation of the Microsoft
ActiveSync/Windows Mobile
Device Center is required.)*1
AC-CORD-EU
AC-CORD-TW
AC-CORD-KR
– 41 –
DT-X200/DT-X8
Test Details
A test fi le is written, read and
compared for the USB memory.
If OK:
The screen returns to the Menu
screen.
If any problem:
An error indication is displayed.
-> Pressing the "Enter" key
returns you to the Menu
screen.