Casio DT-X200 Service Manual page 64

6-3-3. All MODEL
(1) Removing the MAIN-PCB
1. Remove the screws S7 (2 pcs.).
2. Peel off the tape, unlock the connector lock, and remove the FPC.
3. Disconnect the Antenna Cable.
FPC
Screws S7
Note on reassembling:
• Attach the BLIND tape and the EMI-SHEET.
DT-X200-20E
DT-X200-20C-CNV
(BLIND tape only)
DT-X200-21E
(BLIND tape and
EMI-SHEET)
DT-X200-41E
(EMI-SHEET only)
Antenna Cable
BLIND tape
BLIND tape
EMI-SHEET
– 61 –
DT-X200/DT-X8
EMI-SHEET
Attach it over the BLIND tape.