Casio DT-X200 Service Manual page 46

4. Bluetooth Class2 (Communication)
No. Operation
Opposing DT-X200/DT-
X8:
Start up "BTServer"
under \\My Device\
FlashDisk\DIAG\WLAN
via Explorer.
1
Select one from the "BT
Test Server A to F".
The communication
distance between DT-
X200/DT-X8s should
be within 3 m.
Test target DT-X200/
DT-X8:
Start up "BTLineTest"
under \\My Device\
FlashDisk\DIAG\WLAN
via Explorer.
Select one of "BT Line
Test A to F" which
matches with the
server you selected for
opposing DT-X200/DT-
X8.
e.g.
If you selected "BT
Test Server A" for the
opposing DT-X200/
DT-X8, select "BT Line
Test A" for the test
2
target DT-X200/DT-X8.
Display
– 43 –
DT-X200/DT-X8
Test Details
The Indicator 2 (the right
side LED) starts fl ashing
in blue.
The opposing DT-X200/
DT-X8 is automatically
detected.
The Indicator 2 (the right
side LED) starts fl ashing
in blue.
The test target
DT-X200/DT-X8
is automatically
connected to the
opposing DT-X200/
DT-X8 and data is
transmitted/received
between them.
When the test completes
successfully, a screen
shown on the left
appears.
Tip the "[ENT] End"
button on the screen to
terminate the Bluetooth
communication test.
For the opposing DT-
X200/DT-X8, tip "Enter"
in the same way.