Casio DT-X200 Service Manual page 57

(2) Removing the NFC-UNIT (NFC type)
1. Peel off the tape, unlock the connector lock, and remove the FPC.
2. Remove the screws S1 (2 pcs.) and detach the NFC-UNIT.
Screws S1
(3) Removing the SBAT-UNIT
1. Remove the screws S1 (3 pcs.) and detach the SBAT-SPACER.
2. Peel off the tape.
3. Disconnect the SBAT-UNIT connector to remove the SBAT-UNIT.
Note: SBAT-UNIT is fi xed with a double-face tape.
Screws S1
Note on reassembling:
• Stick the lead wires (2 pcs.) with a tape.
CAP-UNIT PCB
Run the lead wires so that they do not run off the CAP-UNIT board.
FPC
Connector
Note on reassembling:
– 54 –
SBAT-SPACER
Tape
SBAT-UNIT
DT-X200/DT-X8
NFC-UNIT