Casio DT-X200 Service Manual page 66

6. Peel off the tape, unlock the connector lock, and remove the FPC.
7. Remove the TR-IC-UNIT.
8. NFC type
Peel off the tape, unlock the connector lock, and remove the FPC.
FPC
(2) Removing the SCANNER-UNIT
1. Remove the screw S1 (1 pce.).
2. Remove the SCANNER-UNIT.
The following photo shows the model for 1D Laser model.
Note: SCANNER-UNIT is fi xed with a double-face tape.
Screw S1
1D Laser model
FPC
(NFC type)
TR-IC-UNIT
2D Scanner model
– 63 –
DT-X200/DT-X8
MAIN-PCB
Double-face Tape
Full Range Imager model