Installation Instructions; Installation Checklist Fetal Monitor - Philips Avalon FM20 Service Manual

Installation Instructions

3
Installation should be carried out by authorized and qualified service personnel, by Philips directly, or a
Philips certified service partner/dealer.
As the first step in preparing the monitor for use, follow the installation instructions given in
this chapter.
The information contained in this chapter, in addition to that given in the Instructions for Use, should
enable the monitor to be installed ready for use (the preparation and planning should be adhered to as
specified in the "Site Preparation" chapter). Safety checks and inspection procedures for mounts are
explained in the "Testing and Maintenance" on page 55 chapter, and the configuration of the system is
explained in the Configuration Guide.
Not all accessories and supplies may be available in all geographies. Please contact your local Philips
sales representative for details of availability.
Please keep the packing materials until you have completed the initial inspection, in case there is a
defect on arrival.

Installation Checklist Fetal Monitor

Use this checklist to document your installation.
Step
1
2
3
4
5
6
Task
Perform initial inspection of delivery, unpack, and check the shipment
(see "Unpacking and Checking the Shipment Fetal Monitors" on
page 26)
Mount the monitor as appropriate for your installation (see "Mounting
Instructions" on page 28)
Connect the fetal monitor to AC mains using the supplied power cord.
This configuration varies, depending whether an external power
supply/battery option is used (see "External Power Supply (FM20/30
Battery Option #E25 only)" on page 29
Perform safety tests (see "Safety Tests" on page 59)
Check that default settings (including the line frequency) are
appropriate for your institution
Check/set the paper scale (see "Checking/Setting Paper Scale" on
page 36)
3
Check when
done
25