Recommended Separation Distances From Other Rf Equipment - Philips Avalon FM20 Service Manual

location in which the device is used exceeds the applicable RF compliance level above, it should be
observed to verify normal operation. If abnormal performance is observed, additional measures may
be necessary, such as reorienting or relocating the device.
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects, and people.
If you require further information or assistance, please contact Philips Support.

Recommended Separation Distances from Other RF Equipment

The device is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or user of the device can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment and the
device as recommended below, according to the maximum output power of the communications
equipment.
Table 5 - Separation Distance (d) in Meters According to Frequency of Transmitter at IEC 60601-1-2 Test
Compliance Level
Rated Maximum Output
Power (P) of Transmitter
(in Watts)
0.01 W
0.1 W
1 W
10 W
100 W
Radio Frequency Radiation Exposure Information
The radiated output power of the device is far below the FCC radio frequency exposure limits.
150 kHz to 80 MHz 80 MHz to 800 MHz
0.1 m 0.1 m
0.4 m 0.4 m
1.2 m 1.2 m
3.8 m 3.8 m
12.0 m 12.0 m
12 Specifications
800 MHz to 2.5 GHz
0.23 m
0.7 m
2.3 m
7.3 m
23.0 m
249