Philips Avalon FM20 Service Manual page 182

10 Repair and Disassembly
Holding both assemblies together, carefully place the unit upside down on a soft surface to
5
prevent scratching or other damage.
6 Refit the four screws securing the top cover assembly to the bottom housing, using a T-10 Torx
driver, as a reversal of the procedure in "Removing the Top Cover Assembly" on page 141. Turn
the monitor the right way up.
CAUTION
When replacing the top cover, do not over-torque the screws. Excessive torque may damage the screw
mountings.
182