Exchanging The Bus Master Board; Exchanging The Fetal Socket Connector Block; Reassembling The Front End Assembly - Philips Avalon FM20 Service Manual

10 Repair and Disassembly
All components of the front end assembly are now separated.

Reassembling the Front End Assembly

The procedure to reassemble the front end assembly is a reversal of the removal procedure. Ensure all
the cables are properly reconnected.

Exchanging the Bus Master Board

Remove the front end assembly -- see "Removing the Front End Assembly" on page 200.
1
Strip the front end assembly down to its component parts -- see "Disassembling the Front End
2
Assembly" on page 202.
Take a new bus master board and reassemble the front end assembly -- see "Reassembling the
3
Front End Assembly" on page 205.

Exchanging the Fetal Socket Connector Block

Remove the front end assembly -- see "Removing the Front End Assembly" on page 200.
1
Strip the front end assembly down as far as the end of step 5 under "Disassembling the Front End
2
Assembly" on page 202.
Take a new fetal socket connector block.
3
4 Reassemble the front end assembly -- see "Reassembling the Front End Assembly" on page 205.
206