Start And Stop Presentation - Cisco TelePresence CE9.13 User Manual

Content Sharing

Start and Stop Presentation

1
Make sure your presentation source is connected and On. You
may need to select Share and press OK on the remote control.
3
The size of the shared image is controlled by means of the
Minimize/Maximize icon. Select this and press OK on the
remote control, if needed.
D15097.23 Cisco TelePresence SX10, SX20 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
You may now select Local preview to inspect the contents
without sharing it with the others, before you select Share in
call to share it with the others.
4
To stop sharing content, select Stop sharing and press OK on the
remote control.
About Content Sharing
Use this feature to share content
on your PC in a call or outside a
call. The procedure is the same, but
shown here is the in-call way only.
To share content using Proximity,
make sure your presentation source
has Cisco Proximity installed and
activated. Allow some time for the
pairing to take place. Follow on-
screen instructions.
24