Cisco TelePresence SX20 Codec
Introduction
Dial commands
xCommand Dial
Dial out from the system. Returns information about the CallId and ConferenceId, which are
required for some of the other commands.
Requires user role: ADMIN, USER
USAGE:
xCommand Dial Number: "Number" [Protocol: Protocol] [CallRate: CallRate]
[CallType: CallType] [BookingId: "BookingId"] [Appearance: Appearance]
[DisplayName: "DisplayName"]
where
: String (0, 255)
Number
Enter the number or address.
: H320/H323/Sip/Spark
Protocol
Select the call protocol.
: Integer (64..6000)
CallRate
Set the call rate.
: Audio/Video
CallType
Select the call type.
: String (0, 255)
BookingId
Any identifier that an external booking system (e.g. TMS, CTS-MAN) can use for its
own references to match placed calls with the booking systems internal identifier for a
meeting. This can be any string, e.g. a GUID. The booking Id is supplied in call logs, call
events etc for the call.
: Integer (1..999999999)
Appearance
Internal usage only.
: String (0, 255)
DisplayName
The display name of the remote participant.
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API
xConfiguration
xCommand
xCommand
HttpFeedback commands
xCommand HttpFeedback Deregister
Deregister the HTTP feedback over HTTP(S).
Requires user role: ADMIN
USAGE:
xCommand HttpFeedback Deregister FeedbackSlot:
where
: Integer (1..4)
FeedbackSlot
Deregister the feedback slot that was registered using the xCommand HttpFeedback
Register command.
107
API Reference Guide
xStatus
Appendices
FeedbackSlot
Copyright © 2017 Cisco Systems, Inc. All rights reserved.