Performance Series HQA Digital Video Recorder Local User Guide
Configuring UPnP Settings
The Universal Plug and Play (UPnP) protocol is used to map the relationship between the LAN
and the WAN.
To configure UPnP settings
1.
Go to Main Menu Setting Network UPNP.
Figure 9-9
2.
On the UPNP page, configure the following settings:
•
PAT
•
UPNP VAV Report
•
LAN IP
•
WAN IP
3.
Click Apply to save your settings.
Editing a Mapping Relationship
If you want, you can edit a mapping relationship from the PAT Table list:
1.
Click the mapping relationship that you want to edit.
2.
Edit the Ext.Port details in the Port Info dialog box.
Click OK.
3.
80
Click to Enable or Disable UPnP.
Enable/disable UPnP to work with I View Now.
Enter the DVR's IP address from the TCP/IP page.
Enter the router IP address.