Honeywell HRHT4041 User Manual page 45

Expanded PTZ Control Panel
Figure 3-9
Table 3-4
# Name
1 Preset, Tour,
2 No.
3 Aux
4 Enter Menu
5 AutoScan
6 AutoPan
7 Flip
8 Reset
9 Aux Config
To display the PTZ control panel
1. Right-click anywhere on the screen to display the shortcut menu.
2. Click Pan/Tilt/Zoom. The PTZ control panel opens.
Figure 3-10
3. To expand the PTZ control panel, click the arrow at the right side of the panel.
Function
Configure/call PTZ functions.
Enter number of PTZ function to call.
Call auxiliary functions.
Enable up-the-coax OSD menu configuration for non-PTZ
Cause camera to continually pan between two points that
you have defined.
Cause camera to continually rotate 360 degrees.
Cause camera to rotate 180 degrees.
Restore default settings.
Configure auxiliary functions.
Viewing Live Video
33