Configuring Encoding Settings - Honeywell HRHT4041 User Manual

Performance Series HQA Digital Video Recorder Local User Guide
•
NR
6. Click Apply to save your settings.

Configuring Encoding Settings

To configure a camera's video and audio encoding settings
1. Go to Main Menu  Setting  Camera  Encode.
Figure 8-3
2. On the Encode tab, in the Channel box, select the camera that you want to configure.
3. Configure the following settings for the primary stream and secondary stream:
•
Type
•
Compression
•
Smart Codec
•
Resolution
•
Frame Rate
•
Bit Rate Type
62
Select a value between 0 and 100. The default setting is 50.
Set the primary stream type as Regular, MD (Motion
Detection), or Alarm. The secondary stream type is not
configurable.
This setting is not configurable.
Select Start from the drop-down menu to enable the Smart
Codec function, which reduces the video bit stream for
non-important recorded video to maximize storage space.
Set the primary stream to one of the following resolutions:
2560 x 1440, 1080P, 720P, 960H, D1, HD1, 2CIF, or CIF.
Set the secondary stream to one of the following
resolutions: D1, CIF, or QCIF.
Select a value between 1 and 30 (NTSC) or 1 and 25 (PAL)
for the Main Stream. Select a value between 1 and 15
(NTSC) or 1 and ? (PAL) for the Main Stream.
Set to CBR (constant bit rate) or VBR (variable bit rate).