Honeywell HRHT4041 User Manual page 108

Performance Series HQA Digital Video Recorder Local User Guide
Table 8-1
Configuration
Enable
Alarm Name
Period
Show Message
Send Email
Record Channel
PTZ Activation
96
Description
Click to enable alarms. Select a channel from the drop-down list.
Enter an alarm name.
Define a period during which motion detection is active.
1. Click Set. The Set configuration interface appears.
2. Click Set after a day of the week to set time periods for that day.
3. Enter a time range (Period) for when the event detection area is active,
then click the check box to activate that Period.
Note You can configure up to 6 periods within one day..
4. Click Save.
To Copy Time Periods to Other Days
1. Click Set to select a day with configured time periods.
2. Click the boxes besides the days to select the days to which to copy
the periods.
3. Click Save.
Click to enable a pop-up message on your local host PC screen to let you know an
alarm has occurred.
The system can send an email when an alarm is detected.
When you have enabled the Snapshot function, the system can also send an image
attached to the email. Go to Main Menu Setting NetworkEmail to configure
the email settings. See Configuring Email Settings
The system automatically starts recording selected channels when a motion
detection alarm occurs.
Note You need to set the alarm recording period.
Go to StorageSchedule to configure the current channel for scheduled
recording. See Configuring Record Settings
When PTZ activation is configured, the system can activate.
1. Click Set to open the PTZ Activation configuration interface.
on page 78.
on page 111.