Configuring Hdd Settings - Honeywell HRHT4041 User Manual

Performance Series HQA Digital Video Recorder Local User Guide

Configuring HDD Settings

To configure HDD settings
1. Go to Main Menu  Setting  Storage  HDD Manage.
Figure 11-4
SATA
Device Name
Type
Status
Free Space/
Total Space
2. The HDD is configured as read-write by default. To change the HDD type to read-only, in
the Type column, select Read-only HDD. The DVR restarts to apply the new setting.
3. To erase all the data from the HDD, click Format. The message "Confirm format on the
selected device?" Click OK to continue.
110
o indicates the current HDD is normal.
x indicates there is an error.
− indicates that there is no HDD.
? indicates that a HDD is damaged.
The HDD name.
The HDD type (read-write or read-only)
The current operating status of the HDD.
The amount of free space remaining on the HDD/
The total capacity of the HDD.