Honeywell HRHT4041 User Manual page 39

ZOOM
REALTIME
BACKUP
MANUAL SNAP
MUTE
Live View Toolbar
Figure 3-4
If enabled, the live view toolbar appears along the bottom of the live view screen.
The toolbar is disabled by default. To enable it, right-click and go to Main Menu > Setting >
System > General > General and select the Navigation check box and then click Apply. Right-
click twice to return to the live view screen. Click anywhere on the screen to display the toolbar.
Table 3-2
Main Menu
Expand/ Condense
Toolbar
Screen Layout
Previous/Next
Screen
Tour Switch
Enlarge a specific area of the image. Click the button
to enable digital zoom and then drag the mouse in the
channel window to select the area that you want to
enlarge.
Save a clip to a USB storage device. Click the button to
start recording. Click again to stop recording. The clip
is automatically saved to the connected USB storage
device.
Save a screen capture to the hard drive or to a
connected USB storage device. To view the captured
image, go to Main Menu > Operate > Search and click
the File List button.
Mute the video sound (if applicable). Click the button to
mute sound. Click again to enable sound.
Note: Mute only works in single-channel view.
Open the main menu.
Expand or condense the toolbar
Select screen layout format.
Navigate to the previous or next screen/channel.
Enables tour (automatically cycles through
channel views). See
page 121.
Viewing Live Video
Configuring Tour Settings on
27