Honeywell HRHT4041 User Manual page 52

Performance Series HQA Digital Video Recorder Local User Guide
Figure 4-2
2. On the Record tab, in the Channel box, select the channel (camera) that you want to
configure a recording schedule for.
3. In the PreRecord box, enter a time between 0 and 30 seconds. The default setting is 4
seconds. The pre-record time sets how long the DVR records before the scheduled
recording start time.
4. If the DVR has two HDDs, select the Redundancy check box to enable redundant
recording on the second HDD. This HDD must first be configured on the HDD Manage
page (see Configuring HDD Settings
5. At the top of the scheduling table, select the check box(es) of the recording type(s) that
you want to schedule:
Regular
•
MD
•
Alarm
•
MD&Alarm
•
Intel
•
6. At the left of the scheduling table, select the day(s) of the week that you want to configure
a recording schedule for. To configure the same recording schedule for all of the days at
the same time, select All.
7. Click or drag the mouse in the scheduling table to set the recording period. To erase a
recording period, click the eraser icon at the right of the table. Alternatively, for the day of
the week that you want to configure, click the gear icon at the right of the table. In the
Period window, set up to six recording periods. To copy the settings to additional days,
select the appropriate check box (es) under Copy, and then click Save.
8. Click Apply to save your settings.
40
on page 110).
The regular recording schedule is indicated by a green bar.
The motion detection recording schedule is indicated by a yellow bar.
The alarm recording schedule is indicated by a red bar.
The motion detection and alarm schedule is indicated by a blue bar.
Intelligent identification recording, or Face Detection recording, is
indicated by an orange bar.