Honeywell HRHT4041 User Manual page 121

Figure 11-3
2. On the Snapshot tab, in the Channel box, select the channel (camera) that you want to
configure a recording schedule for.
3. At the top of the scheduling table, select the check box(es) of the recording type(s) that
you want to schedule:
•
Regular
•
MD
•
Alarm
•
MD&Alarm
•
Intel
4. At the left of the scheduling table, select the day(s) of the week that you want to configure
a recording schedule for. To configure the same recording schedule for all of the days at
the same time, select All.
5. Click or drag the mouse in the scheduling table to set the recording period. To erase a
recording period, click the eraser icon at the right of the table. Alternatively, for the day of
the week that you want to configure, click the gear icon at the right of the table. In the
Period window, set up to six recording periods. To copy the settings to additional days,
select the appropriate check box(es) under Copy, and then click Save.
6. Click Apply to save your settings.
7. To copy the settings to additional channels, click Copy, select the channels that you want
to copy the settings to, and then click OK.
The regular recording schedule is indicated by a
green bar.
The motion detection recording schedule is
indicated by a yellow bar.
The alarm recording schedule is indicated by a red
bar.
The motion detection and alarm schedule is
indicated by a blue bar.
Intelligent identification recording, or Face
Detection recording, is indicated by an orange bar.
Configuring Storage Settings
109